Personalisation – Topcom BUTLER 3500 User Manual
Page 13
Topcom Butler B3500/3501/Twin
13
Topcom Butler B3500/3501/Twin
ENGLISH
4. PERSONALISATION
4.1 ADJUSTING THE RING VOLUME
4.1.1 Handset ringvolume External/internal calls
The handset ringvolume for internal or external calls can be set separately:
1.
Enter the menu by pressing
/OK
2.
Select HANDSET using the up
and down
keys
3.
Press OK
4.
Select INT RING VOL or EXT RING VOL using the up
and down
keys
5.
Press OK
6.
Select the desired volume (OFF or 1 to 3 )
7.
Press OK to confirm or
to return to the previous menu.
4.1.2 Base ring
1.
Enter the menu by pressing
/OK
2.
Select SETUP using the up
and down
keys
3.
Press OK
4.
Select BASE VOLUME using the up
and down
keys
5.
Press OK
6.
Select the desired volume (OFF or 1 to 3 )
7.
Press OK to confirm or
to return to the previous menu.
4.2 CHOOSING THE RING MELODY
The base and each handset can ring with a different melody.
The handsets can ring with a different melody according to whether the call is internal or external.
4.2.1 Base melody
1.
Enter the menu by pressing
/OK
2.
Select SETUP using the up
and down
keys
3.
Press OK
4.
Select BASE MELODY using the up
and down
keys
5.
Press OK
6.
Select the melody of your choice ( 1 to 3 ) using the up
and down
keys
7.
Press OK to confirm or
to return to the previous menu.
4.2.2 Handset melody, external call
1.
Enter the menu by pressing
/OK
2.
Select HANDSET using the up
and down
keys
3.
Press OK
4.
Select EXT MELODY using the up
and down
keys
5.
Press OK
6.
Select the melody of your choice ( 1 to 3 ) using the up
and down
keys
7.
Press OK to confirm or
to return to the previous menu.
4.2.3 Handset melody, internal call
1.
Enter the menu by pressing
/OK
2.
Select HANDSET using the up
and down
keys
3.
Press OK
4.
Select INT MELODY using the up
and down
keys
5.
Press OK
6.
Select the melody of your choice ( 1 to 3 ) using the up
and down
keys
7.
Press OK to confirm or
to return to the previous menu.
Note: Every programmation is confirmed at the end by a double or single long beep. A double bleep
confirms the validation of your choice
A long bleep signifies that the modification has not been taken into account.
B3500.book Page 13 Friday, December 19, 2003 10:08 AM