Tiger Mowers SIDE FLAIL ASEMBLIES JD 5085M-105M - Manual (Page 29)

ASSEMBLY
Assembly Section 2-3
CRANKSHAFT ACCESS
To access the crankshaft of the JD5065M and 5085-105M, a hole will need to be cut
in the front of the tractor casting. The battery plate will need to be raised to cut the hole
and attach the crankshaft adapter. To do this, remove and save the bolts holding the
battery plate to the tractor frame
.
After the bolts have been removed, use a pry bar to raise the battery plate. Once the plate is
raised, use an appropriate block to keep the battery plate raised.
(ASM-JD-0086)
USE PRY BAR
TO RAISE
BATTERY LTE
USE
APPROPRIATE
BLOCK