beautypg.com

Configuring discovery settings, How to use remote scan driver – Toshiba ESTUDIO 3500C User Manual

Page 136

background image

8 Remote Scan

134 Scanning Remotely Using Remote Scan Driver

— Configuring Discovery Settings

You can configure the discovery settings.

1) Devices

Click the arrow button to display the poll down list and check the model name that you want
to search.

2) Network - Enable IPX/SPX Search

This is disabled because the Remote Scan driver does not support the IPX/SPX connection.

3) Network - Enable TCP/IP Search

Select this to search for devices connected to the TCP/IP network. This is available only
when the TCP/IP protocol is installed.
When this is enabled, select how it searches devices in the TCP/IP network.

- Search local subnet — Select this to search devices in local subnet.
- Specify a range — Select this to search devices in specific range of IP addresses.

When this is selected, enter the IP addresses in “From” field and “To” field to specify the
range.

How to Use Remote Scan Driver

In the Remote Scan driver, you can set the various scan settings.

1) Menu Bar

You can select various functions from the menu.

1

2

4

5

3

This manual is related to the following products: