Message waiting light on [phdn/mw, Message waiting light on another telephone – Toshiba Strata CT DKT2510-FSD User Manual
Page 69
Strata CT Digital Telephone User Guide November 2001
53
Features
Message Waiting
Message Waiting Light on [PhDN/MW]
➤
To respond to [PhDN/MW]
➤
To cancel [PhDN/MW]
Message Waiting Light on Another Telephone
➤
To set a message waiting light on another telephone
1. Press the flashing red [PhDN/
MW] LED.
Your phone rings the station or voice mail device that left
the message. If the called party or VM device answers, the
message waiting indication is cancelled automatically. If
there is no answer, hang up and try at a later time. The red
[PhDN/MW] LED on your phone continues to flash.
2. After receiving the message,
press
Spkr
...or place the handset on-hook.
If you have more messages, the red [PhDN/MW] LED
continues to flash. To answer the next message, repeat this
procedure.
1. Press [PhDN].
You hear a steady dial tone.
2. Enter
#409
.
The dial tone stops.
3. Press
Spkr
.
The [PhDN/MW] LED turns OFF, indicating that the
message has been cancelled.
1. Press [DN] and dial an internal
number.
You hear ringback or busy tone.
2. Press
Msg
or
7
.
The Msg or PhDN/MW] LED
flashes red at the called
telephone. The Msg LED lights
steady red at your telephone.
The LCD displays the station
[203] where you set a message
waiting light.
NO. 201
INT 203 MW SET