Automatic line selection, Ringing line preference, Signalling – Toshiba Strata CT DKT2510-FSD User Manual
Page 30
14
Strata CT Digital Telephone User Guide November 2001
Before You Begin
Features
Automatic Line Selection
You have Automatic Line Selection, if you hear dial tone and the [DN], Line,
or Pooled Line Grp LED lights steady green. The LCD displays the station
number (
201
) and the seized Exchange line (sample shown at right).
➤
Lift the handset or press
Spkr
.
You do not have Automatic Line Selection, if you hear silence.
➤
Press an available [DN] or
Line
before dialling.
Ringing Line Preference
You have Ringing Line Preference, if you can answer a line ringing your station by lifting the handset
or pressing
Spkr
. You do not have Ringing Line Preference, if you have to press the button associated
with the ringing call (flashing LED) to answer the call.
If your telephone does not have Automatic Line Selection, press the flashing [DN] or
Line
first,
before using the handset or
Spkr
.
Signalling
If you hear a long tone, followed by a caller’s voice, you have Voice First Signalling.
➤
Talk in the direction of your telephone
...or answer the call as you normally would using either the handset or
Spkr
.
If you hear successive ring tones, you have Tone First Signalling.
➤
Lift the handset or press
Spkr
.
Note
You can change to the alternate signalling method when making a call on a call-by-call basis
by pressing
1
11
1
after dialling an internal telephone number.
NO. 201
USING LINE 11