Monitor configuration, 3 monitor configuration – TANDBERG T2000 MXP User Manual

Page 22

Text mode
Original mode

D1337703_T2000_MXP_User_Manual

2.3 Monitor Configuration

Power on the monitor and use the monitor remote control to select the "PC analog" video input
and Hypersound OFF.

How to select "PC analog" video input:

1. Press "menu" on the monitor remote control. (Note! Not the TANDBERG remote control.)
2. Select "Input select".
3. Select "PC analog".

How to set Hypersound OFF:

1. Press "menu" on the monitor remote control.
2. Select "Sound".
3. Go down to "Hypersound" and set to "OFF". Use arrow keys left and right to change the

setting.