TANDBERG T2000 MXP User Manual
Page 21
Installation
11
4. Camera cable
Connect the camera cable labeled
“
S-video out
”
and "Control in" to the camera as shown on
the figure.
5 ISDN cables
If using ISDN network, connect the ISDN cables to the ISDN sockets (S/T interface) provided
by the network provider. The main ISDN number will be that number associated with the socket
to which ISDN cable number 1 has been connected.
Note! The system does not have a built-in network terminator. If the wall socket provides an
ISDN U-interface, an NT1 between the system and the ISDN line is needed, see
Appendix
10
for more information.
6. LAN cable
To connect the system to a Local Area Network (LAN), connect the cable labeled "LAN
Ethernet" to a suitable Ethernet port on the LAN.
7. VGA cable
For using a PC with your videoconferencing system, connect a PC to the codec with a VGA
cable. For more information, see
PC Presenter.