Connecting cables, 2 connecting cables – TANDBERG T2000 MXP User Manual
Page 20
D1337703_T2000_MXP_User_Manual
10
2.2 Connecting Cables
Connect the cables according to the drawing below. This drawing shows only the active
connectors. Some products may have additional non-working connectors.
1. Power cable
Connect the system power cable and monitor power cable to an electrical distribution socket.
2. Monitor cables
Connect the Video cable labelled "VGA IN, Main Monitor", the Audio cable (with adapter)
labelled "Audio Out" and the power cable to the monitor as shown on the figure.
3. Microphone cable
Connect the microphone cable to the microphone.