Edma module and edma selector – Texas Instruments TMS320C6712D User Manual
Page 44
TMS320C6712D
FLOATINGĆPOINT DIGITAL SIGNAL PROCESSOR
SPRS293A − OCTOBER 2005 − REVISED NOVEMBER 2005
44
POST OFFICE BOX 1443
•
HOUSTON, TEXAS 77251−1443
EDMA module and EDMA selector
The C67x EDMA for this device also supports up to 16 EDMA channels. Four of the sixteen channels (channels
8−11) are reserved for EDMA chaining, leaving 12 EDMA channels available to service peripheral devices. On
this device, the user, through the EDMA selector registers, can control the EDMA channels servicing peripheral
devices.
The EDMA selector registers are located at addresses 0x01A0FF00 (ESEL0), 0x01A0FF04 (ESEL1), and
0x01A0FF0C (ESEL3). These EDMA selector registers control the mapping of the EDMA events to the EDMA
channels. Each EDMA event has an assigned EDMA selector code (see Table 22). By loading each EVTSELx
register field with an EDMA selector code, users can map any desired EDMA event to any specified EDMA
channel. Table 21 lists the default EDMA selector value for each EDMA channel.
See Table 21 and Table 22 for the EDMA Event Selector registers and their associated bit descriptions.
Table 21. EDMA Channels
Table 22. EDMA Selector
EDMA
CHANNEL
EDMA
SELECTOR
CONTROL
REGISTER
DEFAULT
SELECTOR
VALUE
(BINARY)
DEFAULT
EDMA
EVENT
EDMA
SELECTOR
CODE (BINARY)
EDMA
EVENT
MODULE
0
ESEL0[5:0]
000000
−
000000
Reserved
1
ESEL0[13:8]
000001
TINT0
000001
TINT0
TIMER0
2
ESEL0[21:16]
000010
TINT1
000010
TINT1
TIMER1
3
ESEL0[29:24]
000011
SDINT
000011
SDINT
EMIF
4
ESEL1[5:0]
000100
GPINT4
†
000100
GPINT4
†
GPIO
5
ESEL1[13:8]
000101
GPINT5
†
000101
GPINT5
†
GPIO
6
ESEL1[21:16]
000110
GPINT6
†
000110
GPINT6
†
GPIO
7
ESEL1[29:24]
000111
GPINT7
†
000111
GPINT7
†
GPIO
8
−
−
TCC8 (Chaining)
001000
Reserved
9
−
−
TCC9 (Chaining)
001001
Reserved
10
−
−
TCC10 (Chaining)
001010
GPINT2
GPIO
11
−
−
TCC11 (Chaining)
001011
Reserved
12
ESEL3[5:0]
001000
XEVT0
001100
XEVT0
McBSP0
13
ESEL3[13:8]
001001
REVT0
001101
REVT0
McBSP0
14
ESEL3[21:16]
001010
XEVT1
001110
XEVT1
McBSP1
15
ESEL3[29:24]
001011
REVT1
001111
REVT1
McBSP1
010000−111111
Reserved
† The GPINT[4−7] interrupt events are sourced from the GPIO module via the external interrupt capable GP[4−7] pins.