Toshiba IK-WB16A-W - Manual (Page 20)

20
DC INPUT:12V 0.8A
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
MODEL No. IK-WB16A
S/N:
MAC:0002D1714270 B1010XXXX
0002D1714270
00-02-D1-71-42-70 169.254.0.99 IK-WB16A
Installation
Wizard
1. Install the "Installation Wizard" under the Software Utility directory from the CD-
ROM.
2. The program will analyze your network environment. After your network is
analyzed, please click on the "Next" button to continue the program.
3. The program searches for other Network Cameras on the same network.
4. After searching, the main installer window will pop up. Click on the MAC that
matches the one labeled on the side of the camera lens to connect to the
Network Camera.
Assigning IP Address
NOTE
l If "Installation Wizard" does not perform normally or the camera can not be found
during the search even though the camera and a PC are connected correctly, please
switch off the wireless LAN of a PC.
l Installation Wizard can search the location of the Network Camera even though
DHCP is not used on the network. Reassign the static IP address because IP address
of the Network Camera has been set 169.254.*.* by default.