9 exiting punch-in mode, 5 - basic operations – Tascam DA-78HR User Manual
Page 35
5 - Basic operations
TASCAM DA-78HR
35
3
If you want to record the punch-in again, press
the
AUTO IN/OUT
key so that the indicator
flashes, and repeat the process described
above.
4
If you are satisfied with the punch-in, follow
the steps below, otherwise, press
LOC 1
to
return to the punch-in point, press the
AUTO
IN/OUT
key so that the indicator flashes, and
repeat the take.
5.6.9 Exiting punch-in mode
1
Disarm any armed tracks (press the
REC
FUNCTION
switches so that the indicators go
out).
2
Press the
CLEAR
key.
This will exit the
AUTO IN/OUT
(or rehearsal)
mode.
The
LOC 1
and
LOC 2
keys will return to their
usual functions, but the punch points are still
retained in memory.
3
Press the
AUTO MON
key so that the indicator
goes out.
Normal monitoring modes will now be in oper-
ation (see 6, “Monitoring”).