Tripp Lite NetCommander B072-008-1 - Manual (Page 3)

3
Features
• 16-Port KVM Switch with built-in 19" LCD display, keyboard and touch pad
• Access and control multiple multi-platform computers from a single console
• Hot-swappable: disconnect and reconnect USB computers without rebooting
• Auto-scan: with variable time interval
• Compact design: 1U rack mountable
• Easy port selection using (1) On Screen Display (OSD), (2) keyboard hotkeys
key sequences
• Expandable: control up to 256 computers by adding additional KVM switches
• Simple cable management: use standard Cat5e patch cord (maximum distance 100 ft) to
connect to each computer
• Multi-platform: supports PS/2 and USB computers/server
• Optional Tripp Lite B050-000 IP Remote Access Unit to access the B070-016-19 via
LAN, WAN or the Internet
System Components
The NetCommander Cat5 KVM system consists of:
• NetCommander Rackmount Cat5 Console KVM Switch (Model B070-016-19)
• NetCommander Cascadeable Rackmount Cat5 KVM Switch (Model B072-016-1 or
B072-008-1)*
• NetCommander Server Interface Unit - PS/2 (Model B078-101-PS2)*
- USB (Model B078-101-USB)*
• Cat5e Cables (Model N001-Series, N002-Series or N105-Series)*
• RS-232 Serial Firmware Upgrade Cable
* Sold separately
Note: The B070-016-19 comes with a Jumper Cable connecting the Integrated Console Ports and the KVM Console
Ports. Do not remove the Jumper Cable unless you are installing a Tripp Lite B050-000 IP Remote Access Unit. See
B050-000 Installation Procedure for details.
Compatibility
The KVM is compatible with:
• PS/2 and USB computers/servers
• VGA, SVGA, or XGA monitors
• DOS, Windows, LINUX, UNIX, Mac and all other major operating systems
• 1600 x 1200 @ 75Hz (for built-in monitor)