Toshiba 36ZP18Q - Manual (Page 27)

A
Check that the switch on the side is in TV mode.
Check that the batteries aren’t dead and that they
are inserted correctly.
Why doesn’t the remote control work?
FOR YOUR GUIDANCE
27
Q
A
Blue screen in the FEATURE MENU is ON.
When no signal is being received, the TV will
turn off the sound and switch the TV screen to blue.
After 20 minutes the TV will switch to Standby mode.
Why has my screen turned blue?
Q
Q
uestions
and
A
nswers
…
continued
A
If you are unable to obtain surround sound effects
from the rear speakers whilst playing a Dolby
Surround video tape, check that the video recorder is a
stereo unit and is connected by a scart lead.
Check that Dolby Pro Logic is selected from the
SURROUND menu. Check that rear speakers are
connected and the Rear speaker option in the Surround
set up menu is set to YES. Then run the Surround test .
Why is there no Dolby Surround?
Q
Cleaning the screen and cabinet…
After turning off the power, clean the screen and
cabinet with a soft, dry cloth. We recommend that
you do not use any proprietary polishes or
solvents on the screen or cabinet as this may
cause damage.
Disposal…
When the set reaches the end of its useful life
please dispose of it in accordance with L
ocal
Government Regulations or at a recycling centre.
A
…If you are unable to obtain full Dolby Digital
check: The
Rear speaker (in Surround set up )
says YES and the equipment is either connected by a
phono or optical link as well as through a Scart socket
or COMPONENT VIDEO INPUT. Also check that the
correct external source is selected i.e. EXT 3 or EXT 4
(in
AV connections ).
If you connect external front left and right speakers, you
must set the External speaker switch to EXT to get the full
benefit of Dolby Digital – if the switch is left on INT the
external speakers will not function. Turn the television
off before changing the position of the switch.
A
…Check the speaker switch has been set to EXT.
Why is there no Dolby Digital?
Q
Why is there no sound from the external left and
right speakers?
Q
A
Connect the source via a Scart lead and play.
Select the
SET UP menu.
Set the Colour to AUTO and exit.
Go to the PICTURE menu and adjust the tint.
1
2
Why are the colours wrong when I play an NTSC source?
Q
▼
▼
▼
▼
▼
Language ENGLISH
Colour AUTO
Teletext
SET UP
EXIT : To exit
?
For television
operation queries,
please ring the
helpline…
Remember…
For UK only