Dolby pro logic, Surround test mode – Toshiba 36ZP18Q User Manual
Page 18
SPECIAL SOUND FEATURES
18
Press the
M
button to bring up the
SURROUND
menu. With
Dolby Pro Logic
selected, EXIT and go to the
FEATURE MENU
.
Ensure that the
Rear speaker
option is set to
YES, then run the
Surround test
from the
Surround set up
menu.
Use the S and R buttons to adjust.
1
2
3
Inserting the headphone jack will mute the sound from all
speakers and deliver a normal stereo left and right signal.
There are no Dolby Digital or Surround effects available when
using headphones.
From the
FEATURE MENU
select
Surround set
up
.
Using the S or R buttons turn
Rear speaker
to
YES.
Set the
volume
and
balance
of the front
speakers to your preference.
Dolby Pro Logic
– available on many TV broadcasts in addition to video tapes, uses a combination of
4 speaker channels – front-left, centre, front-right and two rear. If external front speakers are not connected,
the left and right front channels will be delivered through the speakers in the TV and you will not hear a
centre channel.
1
2
The test will play a ‘white noise’ through
each speaker in turn. The display will show
you which speaker is in play
, adjustments
may be made whilst it is highlighted. The
Centre channel will only be adjustable once
the external switch has been set to
EXT.
EXIT
: To exit
Left
Centre
Right
Rear right
Rear left
▼
▼
61
▼
▼
61
▼
▼
51
!
☛
EXIT
: To exit
SURROUND SET UP
▼
▼
▼
▼
▼
Back
Rear speaker
YES
Surround test
Delay time
Dolby Pro Logic
Surround Test Mode
YES in the Rear
speaker option must
be chosen for the
Test
Mode below to function…
!
SURROUND TEST
If you cannot connect rear speakers try
selecting Dolby 3 Stereo in Step 2, but you
must have external front speakers connected
and the external sw
itch set to EXT.
!