Tote Vision LCD-1513VB 15.1 - Manual (Page 8)

z Do not locate this product where persons will walk on the cord.
z Use the proper power cord with correct attachment plug type. If the power source is 120V
AC, use a power cord that has UL and C-UL approvals. If the power source is a 240V AC
supply, use the tandem (T blade) type attachment plug with ground conductor power cord
that meets the respective European country’s safety regulations, such as VDE for
Germany.
z Do not overload wall outlets or power cords. Ensure that the total of all units plugged into
the wall outlet does not exceed 10 amperes.
z Ensure that the total ampere ratings on all units plugged into the extension cord is not
above the cord’s rating.
z If the power supply cord, which came with your monitor, is to be connected to the PC
instead of the wall outlet, this equipment is to be used with UL/TÜV approved computers
with receptacle rated 100~240V AC, 50/60Hz, 1.0A(minimum).
Environment
z
Place the monitor on a flat and leveled surface.
z Place the monitor in a will-ventilated place.
z Keep the monitor away from the following:
Do not place unit in extreme hot, cold or humid environment and do not place it directly
under sunlight, dusty surroundings, equipment that generate strong magnetic fields.
z Please adjust the frequency to 75 Hz after setting up the LCD monitor.
z Then push the OSD menu button and use the Auto Adjust function to fine the best mode of
your computer.
Page.12
Display Angle
Tilting
For viewing clarity, you can tile the LCD forward ΰup to 3 degreesα or backward ΰup to
15 degrees α.
Down Κ3 o
Right Κ40 o Left Κ40 o
Up Κ15 o
Page.13