Technicolor - Thomson DGE505N - Manual (Page 7)

Graphics contained within this publication are for representation only. Your unit might differ slightly. 5
OPTICAL
S-VIDEO
R
L
AUDIO OUT VIDEO
OUT DIGITAL AUDIO OUT
COAXIAL
VIDEO
AUDIO
L R S-VIDEO CABLE/ANTENNA
Back of TV (example)
Back of DVD Player
CABLE
OR
OFF-AIR SIGNAL
Chapter 1: Setup and Connections
Connection: TV + DVD
1. Connect the audio cables to the AUDIO OUT L (left – white)
and R (right – red) jacks on the back of your DVD Player, and
to the corresponding Audio Input jacks on your TV
(sometimes labeled AUDIO IN L and R).
2. Connect the video cable.
A. Basic video connection – Connect the video cable (yellow)
to the VIDEO OUT jack on the back of your DVD Player,
and to the Video Input jack on your TV (sometimes labeled
VIDEO IN).
B. S-Video (optional) – If your TV has an S-Video jack,
connect the S-Video cable (not provided) to the S-VIDEO
OUT jack on the back of your DVD Player and to the S-
VIDEO jack on your TV.
3. Connect your cable or off-air antenna to your television as
you normally would. You may need to consult your television
manual for details.
4. Connect the AC power cord into an AC outlet.
Go to page 8
The back of your TV might look different than the one pictured here.
1 2A
3
2B
15909540 FINAL 7/25/02 8:11 AM Page 5