Technicolor - Thomson DGE505N - Manual (Page 6)

Chapter 1: Setup and Connections
4 Graphics contained within this publication are for representation only. Your unit might differ slightly.
OPTICAL
S-VIDEO
R
L
AUDIO OUT VIDEO
OUT DIGITAL AUDIO OUT
COAXIAL
VIDEO
AUDIO
L R S-VIDEO CABLE/ANTENNA
Back of TV (example)
Back of DVD Player
VIDEO
AUDIO
L R
OUT TO TV
Back of VCR (example)
CABLE
OR
OFF-AIR SIGNAL
IN FROM ANTENNA
Connection: TV + DVD + VCR
1. Connect the audio cables to the AUDIO OUT L (left – white) and
R (right – red) jacks on the back of your DVD Player, and to the
corresponding Audio Input jacks on your TV (sometimes labeled
AUDIO IN L and R).
2. Connect the video cable.
A. Basic video connection – Connect the video cable (yellow) to
the
VIDEO OUT jack on the back of your DVD Player, and to the
Video
Input jack on your TV (sometimes labeled VIDEO
IN)
B. S-Video (optional) – If your TV has an S-Video jack, connect
the S-Video cable (not provided) to the S-VIDEO OUT
jack on the back of your DVD Player and to the S-VIDEO jack
on your TV.
3. Connect the antenna or cable to the Antenna Input jack on the
VCR (sometimes labeled IN FROM ANT).
4. Connect a coaxial cable to the Antenna Output jack on the VCR
(OUT TO TV) and to the Antenna Input jack (ANT IN) on the TV.
5. Insert the AC power cord into an AC outlet.
Go to page 8
2A
2B
4
3
The back of your TV and VCR might look different than the ones pictured here.
Note: Don’t connect the DVD player to the VCR, or through the VCR. Doing so
could negatively affect the picture quality and/or disable the DVD player.
1
15909540 FINAL 7/25/02 8:10 AM Page 4