Tripp Lite TE1200 - Manual (Page 3)

Severe undervoltage
correction Input voltages between 75 and 92 are boosted by 30%
LEDS ALARMS & SWITCHES
LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms Audible alarm indicates power-failure and low-battery conditions
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression joule
rating 480
UPS AC suppression
response time Instantaneous
EMI / RFI AC noise
suppression Yes
PHYSICAL
Installation form factors
supported with included
accessories Tower
Installation form factors
supported with optional
accessories Wallmount (UPSWM - tower mounting kit)
Primary form factor Tower
UPS / Power Module
dimensions in primary form
factor (height x width x
depth / inches) 12.8 x 7.5 x 9.2
UPS / Power Module
dimensions in primary form
factor (height x width x
depth / cm) 32.4 x 19 x 23.5
UPS / Power Module weight
(lbs) 38
UPS / Power Module weight
(kg) 17.3
UPS Shipping dimensions
(height x width x depth /
inches) 18.2 x 12 x 13.8
UPS Shipping dimensions
(height x width x depth / cm) 46.4 x 30.5 x 34.9
Shipping weight (lbs) 42
Shipping weight (kg) 19.1
UPS housing material PVC
ENVIRONMENTAL
Operating Temperature
Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius