Tripp Lite TE1200 - Manual (Page 2)

Output Volt Amp Capacity
(VA) 1200
Output kVA capacity (kVA) 1.2
Output Watt Capacity
(watts) 940
Nominal Output Voltage(s)
Supported 115V; 120V
Frequency compatibility 60 Hz
Output voltage regulation
(line mode) -18%, +8%
Output voltage regulation
(Battery mode) 115V (+/- 5%)
Built-in UPS output
receptacles 6 5-15R outlet(s)
Output AC waveform (AC
mode) Sine wave
Output AC waveform
(battery mode) PWM sine wave
INPUT
Rated input current (at
maximum load) 8.25A
Nominal Input Voltage(s)
Supported 120V AC
UPS input connection type 5-15P
UPS Input cord length (ft.) 6
UPS Input cord length (m) 1.8
Recommended Electrical
Service 15A 120V
BATTERY
Full load runtime (minutes) 7 min. (940w)
Half load runtime (minutes) 16 min. (470w)
DC system voltage (VDC) 36
Battery recharge rate
(included batteries) Less than 8 hours from 10% to 90%
Replacement battery
cartridge (internal UPS
battery replacement) RBC53
Battery Access Battery access door
VOLTAGE REGULATION
Voltage regulation
description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147
Overvoltage correction Input voltages between 128 and 147 are reduced by 12%
Undervoltage correction Input voltages between 93 and 107 are boosted by 14%