TRENDnet 800 - Manual (Page 20)

F L Y C A S E
P R O
E X T E R N A L S T O R A G E P E R I P H E R A L S
w w w. p i k a o n e . c o m 20
A N N E X E S
2. Click on the command “unplug or eject hard w a re” and click
on “stop” in the new window.
3. Now click on the device you want to remove and click on “OK”.
4. Follow the instruction and click on “OK” to re c o n f i rm the
successful removal.
WITH MAC OS.
• Remove your FlyCASE volume by dragging its desktop icon
to the wastebasket.
• N o w, you can disconnect the Fire Wi re or USB2 cable and the
power cable.
If you disconnect the FlyCASE using force without following
this pro c e d u re, you risk " crashing" the MAC and losing infor-
mation.
•
T R O U B L E S H O O T I N G
How can I format the FlyCASE PRO in NTFS format ?
The PIKAFORMAT software formats your drive in FAT32 to keep
compatibility with the diff e rent versions of Windows. The NTFS
f o rmat is stronger and more reliable than the FAT32 form a t .
This format is recognized by Windows XP and Windows NT
and 2000 only.
So, using XP or NT or 2000, you can format also the FlyCASE
PRO in NTFS using the Hard Disk drive manager.
My FlyCASE PRO is not recognized
or is randomly recognized on my computer.
• Are both connectors of the FireWire cable firmly attached?
Disconnect the FireWire cable, wait 10 seconds and then
reconnect.
E n s u re that the Fire Wi re connectors are properly aligned. Fire -
Wire cables can only be inserted one way. Make sure that
they are correctly oriented.
Check that the FireWire connectors are straight and fully
seated in the FireWire ports.
Only use certified Fire Wi re cables, such as the cables pro v i d -
ded with your PikaOne drive.
• Have the Fire Wi re drivers been installed correctly and enabled*?
• Is there a conflict with other device drivers?
If you have followed all of these steps and the drive is still
not recognized, shut down your computer, wait a moment and
restart your computer to try again.
(*) You will find hereafter some inform a t i o n ’s on How to do an update
of your Operating system and to verify if it is correctly installed:
Your computer is running Window 98SE
1. Get on Microsoft internet site until reached to the Wi n-
dow 98 support website: www.microsoft.com/windows98