beautypg.com

Advanced sound control, Fine setting of the components – Technicolor - Thomson Thomson Scenium DPL4000 User Manual

Page 24

background image

Advanced Sound Control

Fine Setting of the Components

The receiver has pre-selected surround mode once
you turn on the unit by pressing the Source Buttons
(like DVD, SAT, CD) directly. The default surround
modes for different components are listed in the
table below.
If you decide to change the surround mode, you can
press the SURR MODE button on the main unit or
theater modes on the remote control repeatedly to
toggle among the different surround mode choices
and select the one you want.

PL

II MOVIE PLII MUSIC PRO LOGIC

Stereo

The receiver will keep the last selection in memory.

Input Signal Setting

The receiver defaults to the most convenient settings
for your easiest use (see table).

If your connection is different from the default set-
ting,
1. Select the source
2. Press DIGITAL INPUT button on the main unit or
digital button on the remote control to toggle
among optical/ coaxial/ analog to match your connec-
tion. Your selection will be stored automatically.

The selected source and input source will be dis-
played on the display as long as they are active,
except for some temporary change of display (e.g.
adjusting volume).

Digital Input

Select this setting to play digital signals from a DVD,
CD, SAT or TV.

Analog Input

Select this setting to play analog signals from a
cassette deck or VCR.

EN

21

DEFAULT INPUT (as seen on display)
Analog (SAT/ ANL)
Analog (DVD/ ANL)
Analog (CD/ ANL)
Analog (VCR/ ANL)
Analog (V AUX/ ANL)
Built-in Tuner
Analog (TAPE/ ANL)
Analog (TV / ANL)

SOURCE
SAT
DVD
CD
VCR
V-AUX
FM/AM
TAPE
TV

NOTE

Digital input is only available for DVD, SAT, CD,
V Aux and TV

AVAILABLE INPUT

Analog / Optical / Optical2 / Optical3 / Coaxial
Analog / Optical / Optical2 / Optical3 / Coaxial
Analog / Optical / Optical2 / Optical3 / Coaxial
Analog / - / -
Analog / Optical / Optical2 / Optical3 / Coaxial
Analog / - / -
Analog / Optical / Optical2 / Optical3 / Coaxial

SOURCE
SAT
DVD
CD
VCR
V-AUX
TAPE
TV

NOTE

If linear PCM source (CD), format will be Dolby
Prologic even with Digital Input.

Source/

If Digital Input (optical

If Analog Input

Input

or coaxial) is selected

is selected

DVD

Dolby Digital/DTS

PRO LOGIC

SAT

Dolby Digital/DTS PRO LOGIC

VCR

N/A

PRO LOGIC

V-AUX

N/A

PRO LOGIC

TV

Dolby Digital/DTS STEREO

CD

STEREO (PCM)

STEREO

TAPE

N/A

STEREO

TUNER

N/A

STEREO