Technicolor - Thomson Thomson Scenium DPL4000 - Manual (Page 22)

EN
19
Advanced Sound Control
Sound Enhancement Systems
This receiver is equipped with several built-in sound
enhancement systems.
Dolby Pro Logic II
The Pro Logic II mode uses the built-in circuit to steer the
Left, Center, Right and Surround left and right channel
audio signals and uses all five speakers to play both stereo
and Dolby Pro Logic program source, such as TV and VCR.
Dolby Pro Logic
II includes Dolby Pro Logic II Movie, Dolby
Pro Logic II Music and Dolby Pro Logic.
Use this mode to suit the type of program (such as VCR).
Dolby Digital
The Dolby Digital mode lets you enjoy full digital
surround from software processed in the Dolby Digital
format. Dolby Digital provides better sound quality and
more powerful presence than conventional Dolby
Surround.
This unit is equipped with Dolby Digital 5.1-channel so
that you can enjoy enhanced full digital surround sound.
Being different from Dolby Pro Logic in which only four
channels ( Front Left, Front Right, Centre and Rear ) are
used, the new system provides stereo separation of the rear
speakers (Rear-Right, Rear-Left ). These 5 channels,
together with the subwoofer channel for bass sounds
(counted as 0.1 channel ), constitute as 5.1-Channel ( or 6
Channels ) Input for Dolby Digital that brings you the most
sophisticated sound enjoyment.
Digital Theater Systems (DTS)
DTS is a digital surround system which delivers six channels
of master-quality, 20-bit audio. It offers five full-range
channels plus a special low frequency effect (LFE) channel
for subwoofer, resulting commonly know 5.1 channels. It
can be applied with existing 5.1 speaker configurations.
DTS is available in DVD, SAT/CAB, TV and CD mode. (When
digital cable is connected)
Front Left Speaker Front Right Speaker
Subwoofer
Center Speaker
Rear Right Speaker Rear Left Speaker
Listening
Zone
[
Front Left Speaker Front Right Speaker
Subwoofer
Center Speaker
Rear Right Speaker Rear Left Speaker
Listening
Zone