Topfield TF 5400 PVR - Manual (Page 9)

1.2 Controlling the digital receiver 3
receiver plugged to a wall outlet so as it can run timer events
at any time.
1.2.1 The front panel
The front panel of the digital receiver has buttons to operate
the digital receiver, and lamps and a display to indicate its
status. Their usage is as follows:
TV/STB
OK REMOTE
STANDBY
TV/STB lamp lights up while your video recorder operates
instead of the digital receiver. For more descriptions,
refer to §
3.2.3 .
REMOTE lamp lights up whenever you press a button of
the remote control.
STANDBY lamp lights up while the digital receiver is in standby
mode.
Status display displays the current time in standby mode,
and displays the current status of the digital receiver
in operation mode.
STANDBY button switches the digital receiver between standby
mode and operation mode.
MENU button displays the main menu. It is also used to
return to the previous menu from a submenu.
CHANNEL ❛, ❝ buttons move to the next or previous ser-
vice. They are also used to navigate in menus and in-
teractive screens.