Topfield TF 5400 PVR - Manual (Page 65)

7.1 Recording a program 59
To start recording, select the Record Start; then, the Stop com-
mand gets enabled. You can select that command to stop the
recording.
7.1.3 Making a timer recording
You can make a program to be recorded at a specific time.
Even If the digital receiver is off, it will be turned on and
start recording at a time specified. The digital receiver will
be turned off again as the recording ends.
To make a timer recording, se-
lect the System Setting > Timer
Setting
menu; then a timer list
appears.
To add a new timer entry, press the button, and then a timer
edit box appears.
You have to set the Record option to On to record a program.
If this option is set to Off, the digital receiver will be turned on
at a specified time but not record; instead, you may record a
program with your video recorder in this case.
If you want to record a radio program, set the Type option to
Radio
. Otherwise set to TV.
If you record a satellite program, set the Tuner Select option
to Satellite; otherwise, set it to Terrestrial.
Set the Service option to the service which provides the pro-
gram you want. Pressing the
✄
✂ ✁
OK button on this option dis-
plays a service list in which you can select a desired service.