6 to play back a scrambled recording, 4 editing a recording, 1 to erase a block from a recording – Topfield TF 5400 PVR User Manual
Page 75: To play back a scrambled recording, Editing a recording, To erase a block from a recording
7.4 Editing a recording
69
7.3.6
To play back a scrambled recording
If you have recorded a program from a pay service with its
subscription card, you can play back it as freely as one from
free service. Otherwise you need the subscription card for the
pay service when to play back the recording file because it has
been recorded without unscrambling.
In the recording file list, purely green $ represents that the
file has been recorded with being descrambled wholly; on the
other hand, yellowish green $ represents partially descram-
bled one, and pure yellow $ represents not descrambled one
at all.
Refer to §
for detailed descriptions about how to record a
program from a pay service.
7.4
Editing a recording
7.4.1
To erase a block from a recording
You can cut out a block such as commercial film from a record-
ing file by performing the following steps:
1. Start playback of a recording file you want.
2. Press
button to display a progress bar.
3. Find one end position of a block you want to specify
with
button or
button.
4. Press
button at the position, then the pointer starts
to blink.
5. Find the other end position.
6. Press
button at the position again, then a confirma-
tion box appears.
7. Select the Cut command, then the block is erased.