Topfield TF 5400 PVR - Manual (Page 26)

20 Preference Settings
To configure the video and au-
dio settings, select the System
Setting > A/V Output Setting
menu.
3.2.1 Television standard
The digital receiver supports two types of television standard.
One is the PAL standard, and the other is the NTSC stan-
dard. PAL was adopted in European countries while NTSC
is adopted in USA, Canada, Mexico and so forth.
If you have a PAL television, you have to set the TV Type op-
tion to PAL. In this case, if a service is broadcasted in NTSC
standard, the digital receiver converts it into the PAL standard
for your PAL television. However, its quality would some-
what fall. The opposite case brings about the same result.
The best thing is to watch PAL services with a PAL television
and to watch NTSC services with a NTSC television. How-
ever, the multi television set is able to process both of them.
So if you have an multi television set, set the TV Type op-
tion to Multi. With this option, the digital receiver will output
them without standard conversion. This setting is most rec-
ommended especially if you are not sure what standard tele-
vision you have.
3.2.2 Color model
Through the TV SCART connector, the digital receiver is able
to output video in various color models. If you have the digi-