Toshiba XVR16-60-X - Manual (Page 69)

53
TV-Out Setup
The DVR unit features an optional TV-Out functionality that allows users to output video from any number of cameras, in sequence, to
a television or monitor display.
1. Select the TV Out Port to use
NOTE: Each Port must be configured individually, i.e. one after
the other.
2. Select the Use Box to enable TV-Out functionality for the
selected port.
3. Select each camera to display through the TV-Out port.
4. Select and Event Popup Box if desired
5. Define the Event Holding Time (the number of seconds the
camera displays after an event) for selected event types
6. Define the Auto Switching Time (the number of seconds
between switching of camera) for the selected TV Out Port
Volume
The volume control allows fine tuning of the volume settings on the DVR.
Volume Options:
• Slider Controls – Used to adjust the literal volume for the
respective devices listed.
• Mute Checkbox – Check the mute box to mute volume on
any of the device columns or check the Mute All checkbox to
mute all volume on the DVR.