Toshiba XVR16-60-X - Manual (Page 66)

50
Activate PTZ Preset on Sensor
1. Create PTZ Preset Position. See instructions in the PTZ Setup Chapter.
2. Click the Setup Button on the Main Display Screen.
3. Click the Alarm Setup Button to open the Sensor and
Output Display.
4. Click the Sensor Preset Button.
5. Select the desired camera from the Channel Drop Down
Menu.
6. Select the appropriate sensor from the drop down menu.
7. Select the preconfigured PTZ Preset from the drop down
menu.
8. Click the Set Button. A list of configured Sensor Presets
will display in the box below.
9. Repeat for additional sensors.
10. Click the OK Button to close the Sensor Preset Window.