Toshiba Integrated High Definition DLP 50HMX96 - Manual (Page 51)

51
HMX96 (E/F) Web 213:276
Chapter 5: Using the TV’s features
To deactivate the Input Lock once the GameTimer
has activated it:
Set the Input Lock to Off (- “Using the input lock feature”
on the previous page).
Note:
• A message will appear on-screen when 10 minutes, 3
minutes, and 1 minute remain on the GameTimer.
• If the TV loses power with time remaining on the GameTimer,
when power is restored the TV will enter Input Lock mode
(as if the GameTimer had expired) and you will have to
deactivate the Input Lock (as described above).
Using the control panel lock feature
You can lock the control panel to prevent your settings from
being changed accidentally (by children, for example). When
the control panel lock is On, none of the controls on the TV
control panel will operate except POWER.
To lock the control panel:
1
Press Y and highlight the Locks menu icon.
2
Press b to display the PIN code entering screen.
3
Enter your four-digit PIN code and press T.
4
Press b to highlight Front Panel Lock.
5
Press c and B or b to highlight On and press T. When
the control panel is locked and any button on the control
panel (except POWER) button is pressed, the message
“Not Available” appears.
To unlock the control panel:
Highlight Off in step 5 above, or press and hold the
VOLUME – button on the TV control panel for about 10
seconds until the volume icon appears on-screen.
Setting the sleep timer
You can set the sleep timer to turn off the TV after a set length
of time (maximum of 180 minutes).
To set the sleep timer:
Press [ on the remote control to set the length of time until
the TV turns off. Repeatedly press [ to increase the time in
10-minute increments, or press B or b to increase or decrease
the time in 10-minute increments, to a maximum of 180
minutes.
To cancel the sleep timer:
Press [ until it is set to 0 minutes.
To set the sleep timer using the on-screen menus:
1
Press Y and open the Setup menu.
2
Highlight Sleep Timer and press T.
3
Press the Number buttons to enter the length of time in
10-minute increments.
4
Highlight Done and press T.
Note:
• When a power failure occurs, the sleep timer setting
may be cleared.
• To display the amount of time left on the sleep timer,
press E.
To display the remaining sleep time:
Press [.
Note: A message will display on-screen when there is one
minute remaining on the sleep timer.
ENTER Navigate Select Back EXIT MENU Exit
Enable Rating Blocking
Edit Rating Limits
Channels Block
Input Lock
Off
Off Front Panel Lock
New PIN Code
Game Timer
Locks
Off
Off
Off
On
CH RTN ENTER EXIT Navigate Select Back Exit
Installation
Sleep Timer
On/Off Timer
Setup
PC Settings
Auto
ColorStream HD1 Audio No
No
HDMI 1 Audio
ColorStream HD2 Audio
Sleep Timer
Enter total minutes until the TV
turns off automatically (Maximum
180 minutes)
1 2 0
Cancel Done
Sleep Timer
120 Minutes
HMX96_EN.book Page 51 Friday, April 28, 2006 12:03 PM