Timex M828 - Manual (Page 3)

Step 4: Replace Battery Lid
Replace the battery lid. Turn clockwise to close.
3
With FLEXtime (see page 8), your watch will receive the time and date through
the pager and automatically set itself. Or set it manually, (see pages 9-10).
Set the Time on Your Watch
3
Open the chart on the inside back cover to get an overview of the watch modes
and functions.
Get to Know Your Watch Features
4
2
Step 1: Peel Off Battery Protector
The battery has a protective covering and will not
work unless the covering is removed. Simply peel off
the covering using the tab and let the battery breathe
(vent holes facing upwards) for 2 minutes before
putting it into the watch.
Remove battery protector
Install the Watch Battery 1
Step 3: Place Battery in Watch
Place the battery in the battery compartment
+ (positive side) facing up.
Step 2: Remove Battery Lid
To remove the battery lid, turn the lid counterclock-
wise by pushing against the raised portion of lid
with fingers.
GETTING STARTED
Battery Type: Size 675
The battery is a size 675 common zinc-air hearing aid
battery, not a watch battery. Expected battery life will
vary depending on watch and pager usage.
675 battery cell recommended.
I MPORTANT : Please remove expired
batteries to prevent leakage.
Wait 2 minutes
Open the enclosed activation guide. Review the materials. Call SkyTel and
set up your paging service.
Use the SkyTel Services Guide to Connect
With SkyTel 2
Remove battery lid
Place battery in watch
Replace battery lid
*TIM User Guide.rev4/24 4/24/01 9:13 AM Page 6