Tektronix AD007 User Manual
Page 20
Getting Started
6
AD007 User Manual
Power
LAN-Link
LAN
GPIB
Figure 3: Location of Status Indicators
4.
As the self test runs, the states shown in Table 1 apply.
Table 1: Power on Self Test
GPIB
LAN
LAN-Link
POWER
-- -- -- -- -- -- -- -- -- (30 second self-test, indicators blink amber) -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- (Self test pass, indicators momentarily blink green) -- -- -- -- -- -- --
Off
Off
Red
RJ-45 cable not
connected
No IP address
loaded
Green
5.
If the adapter indicates any other conditions, refer to Table 2 on
page 45 for a complete list of the status indicators.
6.
To repeat the power on self test, simply unplug the DC connec-
tion, wait a couple of seconds, and reconnect.