TP-Link TL-R460 - Manual (Page 57)

TL-R460 Cable/DSL Router User Guide
50
4.8.1 Binding Setting
Choose menu “IP & MAC Binding→Binding Setting”, you can view and add IP & MAC
binding entries in the next screen (shown in Figure 4-42).
Figure 4-42
¾ MAC Address - This field displays the MAC address of the controlled computer in
the LAN.
¾ IP Address - This field displays the assigned IP address of the controlled computer
in the LAN.
¾ Bind - Select Whether enable the arp binding or not. Only bind the MAC address
and IP address can the function take effect.
To add/modify an IP & MAC binding entry:
Step 1: Click Add New…/Modify shown in Figure 4-42, you will see a new screen
shown in Figure 4-43.
Step 2: Enter the MAC Address and IP Address in the corresponding field.
Figure 4-43
Step 3: Bind the MAC and IP address, then click Save button to save the configuration.
To find a specific IP & MAC binding entry:
Step 1: Click Find shown in Figure 4-42, you will see a new screen shown in Figure