TP-Link TL-R460 - Manual (Page 36)

TL-R460 Cable/DSL Router User Guide
29
2) Only the PC(s) on your LAN can use the MAC Address Clone feature.
3) After you finish the configuration, click the Save button, and the router will
prompt you to reboot.
4.4 DHCP
Choose menu “DHCP”, you can see the submenus under the main menu: DHCP Settings,
DHCP Clients List and Address Reservation.
Figure 4-14
Click any of them, and you will be able to configure the corresponding function. The
detailed explanations for each submenu are provided below.
4.4.1 DHCP Settings
Choose menu “DHCP→DHCP Settings”, you can configure the DHCP in the next
screen (shown in Figure 4-15).
The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server,
which provides the TCP/IP configuration for all the PCs that are connected to the router
on the LAN.
Figure 4-15