TP-Link TL-R460 - Manual (Page 33)

TL-R460 Cable/DSL Router User Guide
26
Figure 4-11
¾ User Name & Password - Enter the User Name and Password provided by your
ISP. These fields are case-sensitive
¾ Connect & Disconnect - Click the button, you can handle the on-line connection
or disconnection
¾ Dynamic IP & Static IP - Select the type of IP address under your ISP’s
introduction (We select Dynamic IP for example as shown in Figure 4-11).
¾ Server IP Address/Name - Please type the correct Server IP Address/Name which
your ISP provided.
¾ MTU Size (in bytes) - The default value is 1460, which is usually fine. For some
ISPs, you need modify the MTU. This should not be done unless you are sure it is
necessary for your ISP.