Contrast, Backlight, Power saving – Transcend Information Transcend T.sonic 510 User Manual

Page 18

1. Push

the

Joystick to the right (Next)

or to the left (Previous)

to select the Repeat

icon in the Settings, and then press the Joystick inwards

to enter.

2. Push

the

Joystick to the right (Next)

or to the left (Previous)

to change the repeat

mode. Press the Joystick inwards

again to select the Repeat setting.

Contrast

Sets the contrast of the LCD display.

1. Push

the

Joystick to the right (Next)

or to the left (Previous)

to select the Contrast

icon in the Settings, and then press the Joystick inwards

to enter.

2. Push

the

Joystick to the right (Next)

or to the left (Previous)

to change the Contrast

setting. Press the Joystick inwards

again to select the Contrast change.

Backlight

Sets a timer for the backlight to turn off automatically.

1. Push

the

Joystick to the right (Next)

or to the left (Previous)

to select the Backlight

icon in the Settings, and then press the Joystick inwards

to enter.

2. Push

the

Joystick to the right (Next)

or to the left (Previous)

to change the Backlight

settings. Press the Joystick inwards

again to select the Backlight changes.

3. If you select 5 Sec, the backlight will have a delay of 5 seconds before turning off. If you select

Always off, or Always on, the backlight will not turn on or turn off respectively.

Power Saving

Sets a power saving timer to turn off your T.sonic automatically.