Texas Memory Systems 325 - Manual (Page 32)

• Displays a list of the
current IP
configuration,
hostname, IP
address, subnet
mask, gateway
address (if
applicable), and
hardware Ethernet
address.
• To continue setting
up the Ethernet
configuration
• Shuts down and
restarts the
Ethernet port using
the current IP
assignment
configuration
• Exits the setup
menu.
Show Current Config
Set IP Config
Restart Network
Exit Menu
Use the arrow buttons to scroll up and down through the list.
Pressing the “Menu” button returns to the previous menu, and
pressing the “Select” button exits the menu system. To continue
setting up the Ethernet configuration, select “Set IP Config.”
After selecting “Set IP Config,” you may use the arrow buttons to
cycle through:
• Enables you to set a
static IP address for
the RamSan.
• Sets the IP
configuration to
DHCP
• Disables Ethernet
• Returns to the Main
Menu without
making any
changes
Static
DHCP
None
No change
RamSan-300/320/325 User’s Manual - 28 -