Texas Memory Systems 325 - Manual (Page 31)

Via Text Management
To change the system time via Text Management Interface:
• From the Telnet Main Menu, select “Management setup”
• Select “Set system date/time”
• Select “Set the time”
• Set the time and press [ENTER]
• Select “Set the date”
• Set the date and press [ENTER]
• Select “Save changes and exit”
Figure 4-6: Password Change
4.3 Configuring Ethernet Settings
The RamSan allows system monitoring and configuration through the
serial port and the Ethernet port. To access the system’s Ethernet port,
the administrator must assign the RamSan an IP address, subnet mask,
and possibly a gateway. The administrator may assign the IP address in
one of three ways: Static IP, DHCP, or No Ethernet. The default factory
setting is DHCP.
For any questions regarding IP assignment values, please consult your
network administrator.
4.3.1 Configuring Ethernet Settings via Front Panel
To setup the Ethernet via the Front Panel, use the arrow buttons to
cycle through the top-level menu options until the display shows
“Ethernet Setup.” Use the Select button to choose this option
and continue with the configuration. You may now use the arrow
buttons to scroll through the following menu options:
RamSan-300/320/325 User’s Manual - 27 -