Tiger Products Co., Ltd JD 72-7520 - Manual (Page 30)

Assembly Section 2-6
ASSEMBLY
CABLE VALVE MOUNTING PLATE (CAB)
Align the mounting bracket to the existing holes on top of the tractor remote valve at
the rear of the tractor. Secure the bracket to the tractor with hardware shown in the
parts section of the manual. Attach the valve mounting plate to the valve mounting
bracket on the rear to the tractor as shown below. Then place and secure the lift valve
on top of the mounting plate. Install the control cables and route the hydraulic lines from
the lift valve to the hydraulic cylinders as noted on the lift valve page of the parts section.