Toshiba 42H83 - Manual (Page 14)

Intr
oduction
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
Index
14
(E) 42H83
Connecting an audio system
This connection allows you to use an audio amplifier to adjust the
audio level. This also allows you to use external speakers.
To control the audio, turn on the TV and the stereo amplifier, and
turn off the built-in speakers (see “Turning off the built-in speakers”
on page 51).
You will need:
• one pair of audio cables
Note:
To hear sound when using an external audio amplifier, the
volume of both the TV and the amplifier must be set
above 0 (zero).
Connecting an A/V receiver
This connection allows you to use an audio/video (A/V) receiver to
enhance your TV’s sound.
If you have a system with Dolby Pro Logic
® surround sound, you can
add to the realism of the sound by using the TV’s internal speakers as
center channel speakers.
You will need:
• one coaxial cable
• one set of standard A/V cables
• one single audio cable for the audio center channel
Note:
Refer to the instructions provided with your A/V receiver
for details about your surround sound system.
When the Audio Center Channel ON/OFF switch is in
the ON position, the TV speakers will function only as
center channel speakers. At this time, the SBS feature
should be set to OFF. See page 50.
Adjust the volume for the center channel speakers
using the center level control on your A/V receiver.
To use the TV speakers as normal speakers, set the
Audio Center Channel ON/OFF switch to the OFF
position.
ANT (75 )
ANT-1
OUT
ANT-2
ON OFF
AUDIO
CENTER
CHANNEL IN
OUT
VAR
AUDIO R L
OUT
VIDEO
L/
MONO
IN
L
R
P B
P R
Y
L /
MONO
AUDIO
S-VIDEO
VIDEO
VIDEO-1 VIDEO-2 AUDIO AUDIO
IN IN
L
R
R AUDIO
COLOR STREAM HD 2
COLOR STREAM HD 1
P B
P R
Y
IN For
DVI/HDCP R L
R
DVI/HDCP
IN
AUDIO
CENTER
CHANNEL OUT
VIDEO
OUT
TV
AUDIO IN
L
R
AUDIO
ON OFF
ANT (75 )
ANT-1
OUT
ANT-2
ON OFF
AUDIO
CENTER
CHANNEL IN
OUT
VAR
AUDIO R L
OUT
VIDEO
L/ MONO
IN
L
R
P B
P R
Y
L /
MONO
AUDIO
S-VIDEO
VIDEO
VIDEO-1 VIDEO-2 AUDIO AUDIO
IN IN
L
R
R AUDIO
COLOR STREAM
HD 2
COLOR STREAM
HD 1
P B
P R
Y
IN For
DVI/HDCP R L
R
DVI/HDCP
IN
LINE IN
L R
TV
TV
Caution:
To avoid damaging the TV speakers:
• Turn off the TV before connecting or
disconnecting the Audio Center Channel
cable.
• Do not connect from the A/V receiver’s
Center Speaker OUT (amplified signal) to
the TV’s Audio Center Channel IN.
Amplifier
A/V Receiver
From
Antenna
Dolby Pro Logic* surround sound
system connection example
T V
Right
speaker Left
speaker
Surround
speaker L Surround
speaker R
VCR
A/V receiver
Audio Video
Video
Audio Video Audio center channel
Audio
LDP/DVD
_________
* Dolby Pro Logic is a registered trademark
of Dolby Laboratories Licensing
Corporation.