Toshiba STRATA IP5000 - Manual (Page 116)

User Programming
One Touch Buttons
98
Strata CIX IP5000-series Telephone UG 05/08
One Touch Buttons
One Touch buttons can be used for storing frequently used features or dialed numbers,
such as Speed Dial numbers (use Speed Dial Codes to store additional numbers). One-
touch buttons can be preassigned to your telephone – your System Administrator can
help you identify them.
If you do not have a One Touch button, but you have an available Programmable
Feature Button, you can convert the Programmable Feature Button to a One Touch
button. Perform the procedure called
“Setting/Changing a Programmable Feature
Button’s Function” on page 97 (in Step 4, enter the access code for One Touch button).
Once you have created a One Touch button, you can change the function by using the
following procedure.
Changing a One Touch Button
1. Press
#9876
to enter User Programming Mode.
2. Press the One Touch button to be set.
3. Enter the digits or special buttons for the function to be dialed. You can include the
following in the dial string:
• Dial pad digits
0
~
9
.To program special characters, see Table 13 .
• A maximum of 32 characters.
• Station and System Speed Dial index numbers can be entered. The Speed Dial
index number will automatically dial out on the extension or Line programmed
on the One Touch button with the associated Speed Dial index number.
• Function buttons, except One Touch or a
Program
button.
• Handset hooking (on-hook/off-hook) cannot be recorded.
4. Press the One Touch button to save the entry.
We suggest labelling the One Touch button on your button strip.