beautypg.com

Connecting a digital audio system, Chapter 2: connecting your tv – Toshiba 15CV101U User Manual

Page 22

background image

22

Chapter 2: Connecting your TV

Connecting a digital audio

system

The TV’s DIGITAL AUDIO OUT terminal
outputs a Dolby

®

*

Digital

or 2-channel

down-mixed PCM (Pulse-Code Modulation)
signal for use with an external Dolby

®

Digital

decoder or other external audio system with

optical audio input.

If you have a DTS

*

decoder or processor, you

can obtain the full benefit of 5.1 channel DTS

encoded soundtracks on DVDs and audio CDs.

You will need:

optical audio cable (Use an optical audio cable

that has the larger “TosLink” connector and not

the smaller “mini-optical” connector.)

To control the audio:

Note:

Some audio systems may not be compatible

with Dolby Digital bitstream signals. Older

audio systems that are not compatible with

standard optical out signals may not work

properly, creating a high noise level that

may damage speakers or headphones.

THIS DAMAGE IS NOT COVERED BY

YOUR WARRANTY.

The DIGITAL AUDIO OUT terminal may not

output some digital audio sources because

of copy restrictions.

* Manufactured under license from Dolby

Laboratories. Dolby and the double-D symbol

are trademarks of Dolby Laboratories.

**

Manufactured under license under U.S. Patent #:

5,451,942 & other U.S. and worldwide patents

issued & pending. DTS and the Symbol are

registered trademarks and DTS Digital Out and

the DTS logos are trademarks of DTS, Inc.

Product includes software. © DTS, Inc. All Rights

Reserved.

1

Turn on the TV and the digital audio device.

2

Press

on the remote control and open the

Sound menu.

3

Press

or

to

select

Audio Setup and then

press .

4

Press

or

to

select

Optical Output

Format.

5

Press or to select either Dolby Digital or

PCM, depending on your device.

(

“Selecting the optical audio output format”

on Page 41).

6

To save the new settings, highlight Done and
then press

.

To revert to the factory defaults, highlight
Reset and then press

.

This manual is related to the following products: