Toshiba 32ZP18P - Manual (Page 21)

Select the TIMER option from the top menu bar.
Select the On timer (or the Off timer ). If, for
example, you want the TV to turn ON (or OFF) in
one and a half hours time, enter 01:30 using the
numbered buttons on the remote control.
When setting the On timer , you must enter the
programme position number you want to watch.
You must put the set into Standby mode by
pressing the
i button.
Any equipment connected with Scart leads must
also be put into Standby mode to prevent them
being displayed when the timer switches on.
When the On timer has been set, the GREEN On
timer indicator on the front of the TV will be lit
(see page 6).
▼
▼
▼
AV connection
Picture size/position
Teletext
Surround set up
Language
ENGLISH
Panel lock ON
WSS ON
▼
FEATURE MENU
▼
▼
▼
▼
▼
▼
▼
If the On timer has been set, you do not have to
wait to watch the television. Y
ou can bring the set
back to life by pressing the
i button. However,
the GREEN timer light will stay on until the set
time period has passed, at which point the TV
will go to the chosen channel.
21
If stereo or dual language broadcasts are transmitted the
lights on the front of the TV will be lit. The word Stereo or
Dual will appear on the screen, disappearing after a few
seconds. The display will reappear each time you change
programme positions, provided that the broadcast is in
stereo. If the broadcast is not in stereo the word Mono
will appear.
ADDITIONAL FEATURES
The timer, time display, panel lock
and stereo/bilingual transmissions
The time display facility allows you to see the
current time on the TV screen.
If you press the F button and the
t
button on the
remote control whilst watching a normal TV broadcast
you will see a time display from the broadcaster.
It will remain on the screen for about 5 seconds.
1
2
1
3
4
The Time Display
Choose the required programme number.
Press the O I/II button repeatedly, to select
between Stereo and Mono .
1
Bilingual transmissions are rare. If they are
transmitted the word
Dual will display.
Choose the required programme number and if
the word
Dual does appear press the O I/II
button to select between Dual 1 , Dual 2 or
Mono .
1
2
Panel Lock
From the FEATURE MENU select Panel
lock and choose ON or OFF with the
S or R buttons.
You can tell the TV to turn itself ON or OFF after a
certain time.
…and Bilingual
Stereo…
Panel lock allows you to disable the buttons on the
front of the TV set. You can though, still use all of the
buttons on the remote control.
The Timer
Stereo and Bilingual transmissions…
To cancel the On timer , enter zero in each
position including the programme position.
TIMER
0-9 : To set
EXIT : To exit
When Panel lock
is ON , you will be reminded on the
screen when you press any of the front panel buttons.
Once the set has been switched off it can ONL
Y be brought out of standby using the remote control.
NICAM, MPX
broadcasts can
be in either
Stereo or Mono.
Off timer 00:00
On timer 01:30 P02