Toshiba 32ZP18P - Manual (Page 10)

Using the remote, select the channel to be skipped.
Select the SET UP menu, and then
Programme skip .
Press R to turn Programme skip ON.
Then press the EXIT button. Change to an
un-skipped channel before switching off the TV.
It is necessary to repeat from step 1 for all the
channels to be skipped. The
skipped channels
cannot now be selected by the e P f buttons or
by the controls on the front of the TV but can still
be accessed by the number buttons on the
remote control.
To turn Programme skip OFF , repeat the
procedure on the chosen channel.
Press the MENU button and then the Sor R button
to select the SET UP option from the top bar.
Press Q to highlight Programme swap and
R to select.
The list of stations is now showing. With the
Q
or P button highlight the station you want to
move and press ENTER to select. The station you
are moving will show on the bar at the bottom.
P
P
10
SETTING UP
Swapping programme positions and
programme skip
After Auto tune if you want to swap the position of certain programmes you can. Program swap is an easy
way of storing each channel on the programme position of your choice. Program skip stops the viewing of
certain channels.
With the Q or P buttons again, move through
the list to your preferred position
Press ENTER again. You will see that the
programme positions have now been swapped.
To prevent certain programmes from being viewed, for
example, a certain film by your children whilst your are
out for the evening, you can skip the programme
position and take the remote control with you. The
television will still function as normal using the controls
on the front of it, but the set will not show the skipped
programme position.
1
2
3
3
2
1
5
4
▼
▼
▼
Programme swap
Manual fine tuning
Programme skip ON
SET UP
▼
▼
4
5
6
Skipping programmes…
To swap programme positions…
*
Continental Europe only
SET UP
▼
▼
▼
▼
▼
▼
EXIT : To exit
▼
▼
Colour AUTO
System I
Auto tune
Manual tune
Programme swap
Manual fine tuning
Programme skip
OFF
▼
▼
*
*
…remember…
you must select
each channel
separately.
An * on the screen indicates
a skipped programme position.
…Remember… each channel
has to be INDIVIDU
ALLY
selected and set with
Programme skip ON
or OFF .
PROGRAMME SWAP
ENTER : To swap EXIT : To exit
Prog. Station Channel
1 BBC1 22
2 BBC2 28
3 ITV 25
4 CH4 32
4 CH4 32
▼
▼