Toshiba 32ZP18P - Manual (Page 16)

16
SPECIAL SOUND FEATURES
16 16
Dolby Pro Logic
Press the M button to bring up the
SURROUND menu. With Dolby Pro Logic
selected, EXIT and go to the FEATURE MENU
to select the SURROUND TEST from the
Surround set up menu.
Use the S and R buttons to adjust.
1
2
3
Inserting the headphone jack will mute the sound from all
speakers and deliver a normal stereo left and right signal.
There are no Dolby Digital or Surround effects available when
using headphones.
P
P
From the FEATURE MENU select Surround
set up .
Using the S or R buttons turn Rear speaker to
YES.
Sit in your usual viewing position.
Dolby Pro Logic – available on many TV broadcasts in addition to video tapes. Uses a combination of 4
speaker channels – front-left, centre, front-right and two rear. If external front speakers are not connected,
these channels will be delivered through the speakers in the TV.
1
2
The TEST will play a ‘white noise’ through
each speaker in turn. The display will show
you which speaker is in play
, adjustments
may be made whilst it is highlighted.
EXIT : To exit
Left
Centre
Right
Rear right
Rear left
▼ ▼ 61
▼ ▼
61
▼ ▼ 51
!
☛
EXIT : To exit
SURROUND SET UP
▼
▼
▼
▼
▼
Back
Rear speaker YES
Surround test
Delay time
Remember… Check that Rear speakers are
connected and the Rear speaker option in the
Surround set up menu is set to YES .
!
Dolby Pro Logic
Surround Test Mode
YES in the Rear
Speakers option must
be chosen for the
Test
Mode below to function…
!
SURROUND TEST
If you cannot connect rear speakers try
Dolby 3 Stereo, but you must have external
front speakers connected and the external
switch set to
EXT.
!