Tripp Lite OMNI750ISO - Manual (Page 3)

VOLTAGE REGULATION
Voltage regulation
description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 81 to 143
Overvoltage correction Input voltages between 128 and 143V are reduced by 9%
Undervoltage correction Input voltages between 97 and 107V are boosted by 10%
Severe undervoltage
correction Input voltages between 81 and 96V are boosted by 21%
LEDS ALARMS & SWITCHES
LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms Audible alarm indicates power-failure and low-battery conditions
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression joule
rating 510
UPS AC suppression
response time Instantaneous
EMI / RFI AC noise
suppression Yes
ISOLATION
Output isolation transformer Professional grade load isolation transformer
Surge voltage withstand
capability ANSI/IEEE C62.41 Categories A & B 6KV/200/500 amp 100Khz Ringwave and category B BiWave
Surge voltage attenuation N-G 2000:1, L-G 240:1, L-N 100:1
Insertion loss 65 db N-G from 10Khz to 100Khz, 45 to 60 db L-G from 10Khz to 100Khz, 18 to 54 db L-N from 50Khz to 500
Khz
PHYSICAL
Installation form factors
supported with included
accessories Tower
Installation form factors
supported with optional
accessories Wallmount (UPSWM - tower mounting kit)
Primary form factor Tower
UPS / Power Module
dimensions in primary form
factor (height x width x
depth / inches) 12.8 x 7.5 x 9.2
UPS / Power Module
dimensions in primary form
factor (height x width x
depth / cm) 32.4 x 19 x 23.5
UPS / Power Module weight
(lbs) 36.4
UPS / Power Module weight
(kg) 16.5