Tripp Lite OMNI750ISO User Manual
Page 2

5 diagnostic LEDs indicate AC present, on battery, voltage correction status, overload and battery low/replace
Specifications
OUTPUT
Output Volt Amp Capacity
(VA)
750
Output Watt Capacity
(watts)
500
Output power factor
0.7
Nominal Output Voltage(s)
Supported
115V; 120V
Frequency compatibility
60 Hz
Output voltage regulation
(line mode)
-18%, +8%
Output voltage regulation
(Battery mode)
115V (+/- 5%)
Built-in UPS output
receptacles
6 5-15R outlet(s)
Output AC waveform (AC
mode)
Sine wave
Output AC waveform
(battery mode)
PWM sine wave
INPUT
Rated input current (at
maximum load)
5.5A
Nominal Input Voltage(s)
Supported
120V AC
UPS input connection type
5-15P
UPS Input cord length (ft.)
6
UPS Input cord length (m)
1.8
Recommended Electrical
Service
15A 120V
BATTERY
Full load runtime (minutes)
13.5 min. (500w)
Half load runtime (minutes)
31.3 min. (250w)
DC system voltage (VDC)
36
Battery recharge rate
(included batteries)
Less than 4.5 hours from 10% to 90%
Replacement battery
cartridge (internal UPS
battery replacement)
Battery Access
Battery access door
Battery replacement
description
Hot-swappable, user replaceable batteries