Tripp Lite 500 - Manual (Page 3)

Battery replacement
description Hot-swappable, user replaceable batteries
LEDS ALARMS & SWITCHES
LED Indicators 3 LEDs indicate line power, battery power and battery low/replace status
Alarms Audible alarm indicates power-failure and low-battery conditions
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression joule
rating 480
UPS AC suppression
response time Instantaneous
UPS Dataline suppression 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
EMI / RFI AC noise
suppression Yes
AC suppression joule rating 480
AC suppression response
time Instantaneous
PHYSICAL
Installation form factors
supported with included
accessories Tower
Installation form factors
supported with optional
accessories Wallmount (UPSWM - tower mounting kit)
Primary form factor Tower
UPS / Power Module
dimensions in primary form
factor (height x width x
depth / inches) 8.5 x 5.2 x 7
UPS / Power Module
dimensions in primary form
factor (height x width x
depth / cm) 21.6 x 13.3 x 17.8
UPS / Power Module weight
(lbs) 14
UPS / Power Module weight
(kg) 6.4
UPS Shipping dimensions
(height x width x depth /
inches) 12 x 8.2 x 10
UPS Shipping dimensions
(height x width x depth / cm) 30.5 x 21 x 25.4
Shipping weight (lbs) 15.4
Shipping weight (kg) 7
UPS housing material PVC