Tascam FW-1884 - Manual (Page 35)

Page 35 of 35
User Programmable Functions
There are 18 user­programmable functions that can be used with Cubase SX 2. To
program these, go to “Device/Device Setup …”, select “Mackie Control” on the left and
the “Setup” tab on the right. You can now program the USER A (the footswitch), USER
B (the SHTL button), and 8 buttons, both unshifted and shifted.
Buttons Mapped to Cubase SX 2’s
Footswitch User A
SHTL User B
F7 F1
Shift + F7 Shift + F1
F8 F2
Shift + F8 Shift + F2
F9 F3
Shift + F9 Shift + F3
F10 F4
Shift + F10 Shift + F4
CUT F5
Shift + CUT Shift + F5
DEL
F6
Shift + DEL Shift + F6
COPY
F7
SET + IN Shift + F7
PASTE F8
SET + OUT Shift + F8
There are two user­programmable functions that we strongly recommend mapping to the
set left/right locator functions:
Buttons Mapped to Program as
SET + IN Shift + F7 Transport/Set Left Locator
SET + OUT Shift + F8 Transport/Set Right Locator
There are hundreds of functions that can be applied to these buttons. Some that are
particularly useful are:
· Transport/Metronome on (toggles click on/off)
· Add Track/Audio
· Zoom/(various options)