Tascam FW-1884 - Manual (Page 20)

Page 20 of 35
FE­8 Use With Digital Performer
First, install the DP plug­in V 1.10, included on the CD (or separately downloaded from
the TASCAM web site).
1. Open the Control Surface window (shown below) under the Setup menu. Select
FW­1884 under the Driver pull­down.
2. Select FW­1884 as the first Unit and choose a control port from the MIDI pull­
down. Any control port may be used.
3. Click on the + sign next to the FW­1884 control port to enable another unit. Do
not click on the master + sign outside of the outlined box – that is used for adding
a second driver type.
4. Select FE­8 as the second unit and choose a control port for it.
5. Repeat steps 3 & 4 for all FE­8s connected.
NOTE: V 1.10 DP plug­ins only exist for DP 3.1 and DP 4. DP 2.7 and 3.0 do not
support multiple control surfaces.