Tascam IF-DM - Manual (Page 6)

6
System Requirements
Macintosh
• OS: Mac OS X 10.4.4 or higher
• Computer: Apple Macintosh series with on-board FireWire
• PowerPC G4 1GHz or greater, or any Intel Mac.
• Memory(RAM): 512MB or more
• Higher spec required for 32 channel operation at 96 kHz. – see
System clocking section in this manual.
Windows
• OS: Microsoft® Windows® XP Home Edition or XP
Professional with Service Pack 2
• Computer: Windows® XP Compatible PC equipped with an
IEEE 1394/FireWire Port
• Pentium®, Celeron®, or Pentium® compatible processor
1.6GHz or higher
• Higher spec required for 32 channel operation at 96 kHz. – see
System clocking section in this manual.
• Memory(RAM): 512MB or more
DM-24 (not supported)
The IF-FW/DM
MK
II is not supported in the DM-24. The previous
generation IF-FW/DM is required instead, which provides 24x24
channels at 44.1 kHz and 48 kHz sampling rates.
DM-3200 Requirements
The DM-3200 must be running software V1.30 or higher to use the
IF-FW/DM
MK II. A TFI update file for use with TMCompanion is
provided on the IF-FW/DM MK II CD ROM. You will need to have
TMCompanion installed; this can be found on the CD ROM that
came with your DM-3200. You should always check the
TASCAM website at
www.tascam.com to obtain the latest
available versions. Previous versions of the DM-3200 software
will not recognize the IF-FW/DM
MK II.